Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 33

Thread: Sept '08 KOTM - Steve Wilson

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member DanB's Avatar
    Join Date
    Jun 2008
    Location
    Mesa, AZ
    Posts
    542

    Default Looks Great

    Steve,
    Congratulations on getting 85DD flying again. She sure looked sad sitting in the corner of the hanger when I came up a couple years ago. I third the motion that she deserves to be the maiden Kitfox of the month...you have a great plane!
    Dan B
    Dan B
    Mesa, AZ

  2. #2

    Join Date
    Jun 2008
    Location
    Austin, Tx.
    Posts
    24

    Default I was bummed at first.

    Steve,

    I clicked on the forums and my little orange and white beauty wasn't there
    on the upper right at the very first shot, I was bummed at first,
    then I realized it was yours. If you recall walking across the field to greet us, at Ogden last year, as Denise and I were making our way back to Texas from the Kitfox factory fly-in. We were excited to here about your build story, and if have to lose my picture slot on the forum, I couldn't have picked a better one.

    Congratulations
    Denise and Rocky Whitman
    Series 7 912S
    IVO IFA
    AUSTIN,TX

  3. #3
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default

    Rocky & Denise,
    Yes, I do remember meeting you in Ogden last year. You have a great looking plane. I wanted to get 85DD to this year's factory fly-in but just didn't get things completed in time. She will be there next year for the Kitfox Silver Anniversary! I hope to see you again then.
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  4. #4
    Super Moderator Mark's Avatar
    Join Date
    Jun 2008
    Location
    Boise, ID
    Posts
    111

    Default

    Look at it this way Rocky, your Kitfox was the "pre-KOTM" KOTM.
    Mark & Renee Smith
    Boise, ID
    "Build It ..."

  5. #5
    Administrator RandyL's Avatar
    Join Date
    Mar 2008
    Location
    Woodinville, WA
    Posts
    207

    Default Submit your plane for KOTM!

    Rocky, don't be bummed, achieve worldwide fame and the adoration of your Kitfox peers by submitting your plane for KOTM. The 'sticky' message at the top of this forum has the instructions. It'll stay in the forum forever unlike the front page of the site which will change at the whim of the webmaster.
    Randy Lervold
    TeamKitfox.com Admin Emeritus
    Day job: www.dynonavionics.com

  6. #6
    Senior Member SkySteve's Avatar
    Join Date
    Jun 2008
    Location
    Huntsville, UT
    Posts
    1,054

    Default 85DD Short Take Off Winner

    Just for fun, I just googled "N85DD" and came up with a Kitfox news letter dated June, 1989 which stated, "We won the short-field take-off competition at Watsonville again this year with N85DD, for the fourth time in the four years we've been there". Kind of cool. Try googling your N number. You might be surprised at what you find!
    Steve Wilson
    Huntsville, UT
    Kitfox 85DD
    912A / 3 Blade Taper Tip Warp Drive
    Convertible Nosewheel & Tailwheel
    SkySteve's SPOT Page
    SkySteve's You Tube Videos

  7. #7

    Join Date
    Mar 2017
    Location
    Bend Oregon
    Posts
    7

    Default Re: Sept '08 KOTM - Steve Wilson

    looks awesome, did you do any modifications to increase the usefull load? I've read that the biggest weakness in a kitfox 1 is the lift strut where it connects to the fuselage.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •