Hi Lowell, I was able to get that page shift to stop with some tech support from South Africa. (I was having problems with timely tech help from the U.S. distributor , so I tried emailing the factory in S.Africa and got quick and correct responses fast . Here is the email for future use: info@mglavionics.co.za and Rainier Lamers seems to be the go to guy for help) I too only need one page of readings Oil P & T , CHT and EGT. My display was flipping to the second page because OAT and fuel flow were selected on , although not used. You have to go into the analog channel menu and make sure ALL 4 channels have no parameters set to the on position. This instrument is new and I suspect they might come up with a future software fix that would allow manual instead of the auto 2 sec page flip, but for now , when you shut off those unwanted parameters , the display will stay on the primary page only . I do like the capability of the instrument and its a big step up from the Westach that I ran for so long. Good luck Bruce N199CL