Try a very small restricter under the dash.
I had the same problem.
Rock solid now,possibly reading slightly low at speed and slightly high on approach.
Only a few kts out but ok
Try a very small restricter under the dash.
I had the same problem.
Rock solid now,possibly reading slightly low at speed and slightly high on approach.
Only a few kts out but ok
I plumbed in a static port and my indicator is rock solid. On the model 7 the factory has a recommended static port location that is low on the left side and just ahead of the lift/push handle.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Hi chuck
The hole can be very small,about the size of a pin.
It is effectively only a breather
Re photo,I recently posted some images on where I fly
Thanks for the info. If simply restricting the pitot side doesn't tame oscillations, I'll install a static source. Isn't it amazing the things we do to make a simple airplane complicated.
Chuck Gruby
Petal, Kit Fox III Flying