Where do you get one of these?
Where do you get one of these?
Tom Jones
Classic 4 builder
http://aero-shields.com/
They made mine custom, but I think they have specific sizes for Kitfox now.
Chris G.
Kitfox SS tri-gear
Rotax 912ULS / IVO medium
Marana Regional Airport
Tucson, Arizona
Thanks much!
Tom Jones
Classic 4 builder
I'm going to get a thin piece of M5 lexan, bronze color and put it on the inside top of cabin, i say bronze, what ever matches the turtle deck when im done, and i will stop it at the forward carry thru
I got some windows shades with the suction cups at the local autozone
auto parts, they're for the rear windows in cars. Fit perfect, I use two
one for passenger, one for pilot side.
Not knowing what Efudex was then, and having used in on my face now
since building the plane I probably would have put in a solid roof ...
Skin cancer treatment's not fun.
Jeff.
I just used the automotive window tint film they sell for cheap at the auto store.
You just spray water on, and lay it down. Works great,and is removable too.
Hope this helps
Roger
I love my auto windshield style from Wal-Mart etc. Flexible wire around perimeter and it folds up to a circle around 1 foot diameter. Super Jumbo size for the Series 6. 2 come in a pack.
Front and sides held in place by aircraft structure. 2 plastic tabs attached with clear silicone on the rear carry through for the back. GPS antenna inside the cabin and under the shield has never missed a beat.
On a hot day temps drop noticeably. Best not to open the doors. Feels more like a Cessna (if you like that sort of thing).
P1010012.jpg
P1010013.jpg
Last edited by N981MS; 09-19-2013 at 06:26 AM. Reason: Clarification
Maxwell Duke
Kitfox S6 IO-240 Built it (Flying since 2003)
Maule M7-235C Sold it (liked it though)
RV-10 IO-540 Bought it
Zenith CH-750 Built with 7 friends (DAR Vic Syracuse)