Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: Engine Bolts

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 02-07-2023, 09:44 PM #1
    Geek
    Geek is offline
    Senior Member
    Join Date
    Nov 2019
    Location
    Leavenworth WA
    Posts
    631

    Default Re: Engine Bolts

    Thanks Darrel and Brandon. Appreciate the inputs. I'll get a man right on it.

    Gary
    Gary (Geek) Phenning
    Leavenworth (Not the Prison), WA
    Kitfox STi N68SG
    Reply With Quote Reply With Quote
  2. 02-13-2023, 07:59 AM #2
    patrick.hvac
    patrick.hvac is offline
    patrick.hvac's Avatar
    Join Date
    Jul 2018
    Location
    Ottawa
    Posts
    108

    Default Re: Engine Bolts

    How long are your bushings inside the rubber mounts?
    🇨🇦CANADA
    Flying | SS7 | G3X | Edge 912
    Reply With Quote Reply With Quote
  3. 02-13-2023, 01:52 PM #3
    Geek
    Geek is offline
    Senior Member
    Join Date
    Nov 2019
    Location
    Leavenworth WA
    Posts
    631

    Default Re: Engine Bolts

    Quote Originally Posted by patrick.hvac View Post
    How long are your bushings inside the rubber mounts?
    Whatever was specified in the instructions. Memory says 1 7/16" but don't take that to the bank. One thin washer on the nut side and torqued to the 190 in/lbs was just what it needed to work.

    G
    Gary (Geek) Phenning
    Leavenworth (Not the Prison), WA
    Kitfox STi N68SG
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules