Next question. Seems like I read somewhere in the 900 page manual, does the G3x need permanent 12v power?
Next question. Seems like I read somewhere in the 900 page manual, does the G3x need permanent 12v power?
Last edited by Shadowrider; 07-22-2019 at 03:46 PM.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
Well that's a new one to me. I don't have that. Hope I don't need it. I'm not quite ready to turn everything on yet. Another week or two.
Sent from my SM-G973W using Tapatalk
912 IS
Airmaster Prop
Garmin Stack
C-FKLO
I think is saves configuration and it has a clock so I am pretty sure you need it?
Capture.jpg
Last edited by Shadowrider; 08-02-2019 at 03:28 PM.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
They are the same pins as Dsub pins. You need a Dsub pin crimping tool, similar to this:
https://www.steinair.com/product/4-way-indent-crimper/
Just Google Dsub crimping tool and you can watch a video on how it is used.
Yes I have that tool. These have different pins than all the rest of the connectors? Garmin only gave 4 of them so I was wondering if these are solder pins. My elt I tried to crimp with this tool and the male dsub would not hold the wire on because the wire was so small of wire I had to solder them.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
The gtr20 has dedicated line in on 18,19, 37 for music.
912 IS
Airmaster Prop
Garmin Stack
C-FKLO
Yes. I guess I worded my question poorly. I used the GTX to GTR20 interconnect drawing. It shows music out form the G3x (pins3 9 20) and music in from 19 18 37. I was wondering what this is for? Read more and found this is if you opt for the xm music. It comes from the G3X. Audio alerts come form mono G3x out to the mono GTR20 in.
So I am going to disconnect pins 3 9 20 and hook those to audio jack that goes into my ipad. Audio alerts will still work over the wire I ran from the G3X pin 1 and 18 to pins 32 31 on the GTR20.
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!