I like it!!!
I like it!!!
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear
Great Colour I love it.
Norm
Airdrie Ab, Can
North of Calgary
Flying SuperFox Model IV
That is really nice, Jeff!
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
Looks great!
Mike Bentley
Model IV-1200
Jabiru 2200A #438
Rotec Aerosport LCH Heads
Ellison EFS-2 Throttle Body
Prince Prop (64x34)
My SPOT Page
yeh, I think you did good on that color.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Thanks for the kind words and encouragement! It's getting cold here and I am NOT a fan...
Here are pics of my panel and my custom fuel placard.
Panel sm.jpgfuel placard sm.jpg
Jeff
KF 5
340KF
That colour is stunning. Great work and congrats on getting so close to the line.
David
SS7 Builder
Pulled my oil cooler scoop mold from teh plug today. Came out pretty good! I have since cleaned it up a bit. Should have a part soon!
scoop mold.JPG
Jeff
KF 5
340KF
Jeff, what’s the plug made of ?.
David
SS7 Builder
The plug is made from 2” insulating foam board from a home improvement store. The base was layed up on the cowl so it matched the contour of the cowl. The affected area on the cowl was covered with clear packing tape and sprayed with mold release. The 2 parts (scoop and base) were epoxied together and dressed with a couple layers of glass cloth, bondo, and spot putty to smooth it out. Finally I sprayed 2or 3 coats of epixy primer, sanded it to 2000 grit and called it good.
Jeff
KF 5
340KF