Super-fill

[Frontier Fox]

I have finally begun my build, getting in a few hours from time to time. I was wondering about Super Fill. How much is needed for the whole build.
I am using balsa on the horizontal stab. and elevator and was going to use Super-Fill to smooth and shape.
I see it is available from AS and thought I would order the amount for the whole build. So how much is typically needed?
Thanks
Joe G.

[Esser]

One kit (I think it’s a quart total?) should be enough. I did what you are planning and had enough

[Frontier Fox]

I did not get a Superfil kit with my SS7 kit so I will order one kit as recommended.



Thank you all for your advise.

Joe Gallagher

————————
Building SS7

[jiott]

My kit came with Super-Fill but only because I ordered quite a few optional items, including Super-Fill, with my kit.

[efwd]

yeh Jim, thats probably the same for me. I ordered nearly all the options.

[Frontier Fox]

Ok, so will one kit be enough to do the lift strut fairings also?

Joe G.

[Esser]

Yes, it was for me.

[Frontier Fox]

Ok, thank you for the quick reply.

Joe G.

[efwd]

I happened to run out. I used it to smooth the transition of the leading edge to spar as well as firewall forward fiberglass and the ends of the flapperons in addition to what you mentioned. I would just buy some now then if you need it buy some fresh stuff later. It could be a year or two later depending on your build speed.

[rocketman2tm]

Personally, I would only buy one kit at a time to ensure it stays fresh. That's more so based on the speed that I build.

BTW, I don't think that it comes with the kit.