Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 15

Thread: Transponders

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Jun 2018
    Location
    Caldwell, ID
    Posts
    122

    Question Transponders

    For those who have a Transponder installed in their KF airplane, what one do you have, and how do you like it?



    Thanks,
    Bart

  2. #2
    Senior Member Dave S's Avatar
    Join Date
    Oct 2008
    Location
    St Paul, MN
    Posts
    1,835

    Default Re: Transponders

    Bart,


    We have a Garmin 320A which is a few years old now but has worked flawlessly. The 320a is all solid state without the old cavity tube used in earlier generation transponders.



    I originally paired this with an Ameri King encoder, which failed miserably and is a complete POS - apparently I got the ameri king unit which was built after the company started substituting fake/cheap components which were not compliant with its approval.


    On a related issue, we also installed the echo UAT ADS-B unit with a WAAS which pings off the transponder antenna for mode C data without any complicated wiring.


    Also purchased an iFLY 740-b GPS at a different time than when we got the echo uat and was pleasantly surprised that the iFly wified directly into the echo UAT to provide on screen traffic and weather without any additional hardware, software and no subscriptions.

    The final result of having the Garmin transponder, a functioning encoder, the IFLY GPS and the Echo UAT is that I found myself entering the 21 century (maybe around the year 2010) with a 2020 ADS-B compliant system with both in and out on top of the GPS NAV.


    The whole business is about as cheap as a person could expect, and it works fine.
    Dave S
    Kitfox 7 Trigear (Flying since 2009)
    912ULS Warp Drive

    St Paul, MN

  3. #3

    Join Date
    Jun 2018
    Location
    Caldwell, ID
    Posts
    122

    Default Re: Transponders

    Dave S,


    Thanks, that all sounds pretty good. Any chance you can post a picture or two of your panel?


    Thanks,


    Bart

  4. #4
    Senior Member Dave S's Avatar
    Join Date
    Oct 2008
    Location
    St Paul, MN
    Posts
    1,835

    Default Re: Transponders

    Bart,


    I can't seem to get the upload feature to work due to the file size.


    However, if you go to the "Show us your panel" thread and scroll down to entry #5 on the first page there is a photo of our panel with the Garmin transponder mounted under the radio. Then imagine the iFly screen mounted just above (between the two screws showing near the top center of the panel). It's a 7" wide screen so it fits in the space sticking up a bit above the rim of the glareshield.



    http://www.teamkitfox.com/Forums/showthread.php?t=1930


    The ADS-b only has a switch and breaker added so no other change to the panel.


    Dave
    Dave S
    Kitfox 7 Trigear (Flying since 2009)
    912ULS Warp Drive

    St Paul, MN

  5. #5
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Transponders

    Garmin 327, fairly inexpensive (got mine used) and a few nice features when upgrading from the 320 which I had first.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  6. #6
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,565

    Default Re: Transponders

    Sorry about the on going photo size glitch guys. Especially during AirVenture. Remnants of the data base move to a new hosting server.

    Working on it.


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


  7. #7

    Join Date
    Jun 2018
    Location
    Caldwell, ID
    Posts
    122

    Default Re: Transponders

    Thanks for the info guys. Dave S, that's a really nice panel. I'm looking at a KF 5, and "if and when" I get it, upgrading the panel will high up on the agenda.


    Bart

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •