Hi everyone, I searched the forum but didn't find anything like this. I bought new fuel tanks last year and recently did a fit check with the wings and found that one of the tanks doesn't sit flat on the spars. It appears that it is warped considerably. Placed on the spars and down proper in the front the rear corner near the fuselage side sticks up about 3/8".


I really don't like the idea of building up the ribs on that side high enough to clear the tanks when I put on fabric. I'd welcome any ideas to get it to fit nicely.



By the way, my old un-used tanks fit great with out any problems, I only bought the new ones because of the with auto fuel resin issue.


Thanks, Rick