Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 9 of 9

Thread: Taller Spring Gear

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 05-13-2018, 05:56 AM #1
    Esser
    Esser is offline
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Taller Spring Gear

    I bought a set of spring gear off a guy who had them on his Rans S6. They are 7" taller than the standard Kitfox gear however I drilled hole for my Type 1 axels so over all I am 5" taller over all. I plan on eventually getting the bush gear but this pretty much cost me nothing to do and was a quick add on replacement to get me more prop clearance.

    Currently sitting on Air Trac 8.50s, I have 13.5 deg AOA sitting on the ground on an 8" tail wheel.
    Attached Images Attached Images
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules