Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 25

Thread: Frame color

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    dactel's Avatar
    Join Date
    Apr 2018
    Location
    Portland, OR
    Posts
    103

    Default Frame color

    Hi Everyone,

    I'm a newbie here on TeamKitfox. I have just ordered a S7SS kit recently and I have noticed that the default color for the frame is white. But I'm wondering if it would be better to ask them to do it in different color if available from practical stand point in flight, i.e. the color reflecting off the windshield and becoming a distraction for example... What color would you recommend? I was thinking black.

    Thanks in advance.

    -Terry

  2. #2
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,828

    Default Re: Frame color

    I chose flat black powder coat. warning, its like a chalk board. if you rub something on it, like the fiberglass seat pan or the fiberglass over the instrument panel, it leave scuff marks. they come off but I think I will be tending to scuff marks for eternity. I flew Stick and Rudders airplane that has gloss black frame and it certainly didn't bother me, in fact, it was nice to use those two structures as points of reference to the horizon while in a turn. I suppose you should decide if black is going to match your overall color scheme.
    People do seem to comment on the flat black and that they like it.
    Eddie

  3. #3
    dactel's Avatar
    Join Date
    Apr 2018
    Location
    Portland, OR
    Posts
    103

    Default Re: Frame color

    Quote Originally Posted by efwd View Post
    I chose flat black powder coat. warning, its like a chalk board. if you rub something on it, like the fiberglass seat pan or the fiberglass over the instrument panel, it leave scuff marks. they come off but I think I will be tending to scuff marks for eternity. I flew Stick and Rudders airplane that has gloss black frame and it certainly didn't bother me, in fact, it was nice to use those two structures as points of reference to the horizon while in a turn. I suppose you should decide if black is going to match your overall color scheme.
    People do seem to comment on the flat black and that they like it.
    Eddie
    Hi Eddie,

    Thanks for the reply. I haven't even thought about flat vs gloss. As far as matching with the eventual exterior paint scheme goes, I've figured so far black would go ok with most colors. I think I am going to send and email to John and Debbie about it too.
    Terry
    ATP, Goldseal CFI/CFII/MEI

    SS7
    Portland, OR

  4. #4
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,828

    Default Re: Frame color

    If I recall correctly, John will say he likes the flat black as well. He had a glossy black in the factory when I ordered and when he shipped my kit he thought he really liked the flat black as well.
    Eddie

  5. #5
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,828

    Default Re: Frame color

    I must recall correctly. Just looked at the Kyle Franklin video and note that the speedster frame is flat black.

  6. #6
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Frame color

    My plane is black. I severely wish my frame was black.
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •