-
Super Moderator
Re: Carb sync? Never again.
I did some machine work on the manifolds to position and tap 3/4 NPT holes for the fittings. I got 3/4 NPT to 1" pipe 90 degree elbows from Jegs, 1" thin wall tube from a local supplier and 1" heater noose and clamps from NAPA.
The theory behind the modification is to allow the two manifolds to equalize pressure or vacuume between them easier.
Photos later today.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules