question ?

[nidaho]

what is everyones thoughts on building a plane before you get your license. Ive wanted to build for 5 or 6 years but the economic crash set me back I am again looking into building one. I wanted to use the new plane to get my license, not sure if the kit fox is suitable for a person to get a license in. thanks for any info.

[Norm]

It's a great idea. I'm teaching someone to fly in my KF4. You may want to consider using the tricycle gear option but you will find the kitfox a tough plane to beat both to learn and to progress as your skills improve.
My thoughts.

[jiott]

I built my Kitfox SS7, then went to Stick & Rudder in Boise and got my license (I had never flown before), then came home and did my maiden flight and Phase I testing on my own plane.

I found no good way to use my own newly-built Kitfox to take my training in. There were no Kitfox instructors in my area, someone else would have had to fly off the first 40 hours of Phase I testing before it could be used for training, then I would have had to have someone else fly it to Boise to be used in my training.

[nidaho]

I could get my license with the local air port in a 150 or 172, I have looked into stick and rudder and thought that also to be an option. I am going to build a trike gear I think. only question about the trike was if I could land at all the grass strips that tail draggers could, the strips looks pretty nice from the pictures.

[Dusty]

My brother learnt to fly in his own KF4 ,he had no problem.
I wish I had learnt in a fox

[GuppyWN]

I could get my license with the local air port in a 150 or 172, I have looked into stick and rudder and thought that also to be an option. I am going to build a trike gear I think. only question about the trike was if I could land at all the grass strips that tail draggers could, the strips looks pretty nice from the pictures.

I've flown nose draggers for 30 years. As a recent tailwheel pilot I beg you to put the wheel where it belongs on a Kitfox! it just doesn't look the same and the taildragger is very tame.

[Cherrybark]

When you are sitting in your rocker amazed that your 90th birthday has arrived, be able to look back on adventures and accomplishments rather than things you wish you had done!

[nidaho]

now I all I have to do is convince the wife that spending 67-75 thousand to build and learn to fly a kit fox is a good idea, shes not totally against the idea, the house is paid for the kids are gone. probably wont be able to start on one till the end of next summer. I am selling the house and building a new one and a 28x30 shop thanks for the input willy

[Dave S]

Willy,

There is a list member who did exactly what you are considering......and his story is on this list under "Kitfox of the month" Patrick Hintz model 6.


Great story, worth a read.

[Cherrybark]

If you can manage 32' or maybe even 34' on the interior of the new shop it will come in useful when it's time to rig the wings. With a 34' width you should be able to squeeze your way around the wings rather than having to repeatedly duck under. And I can promise, during the wing rigging process, the drift pin, wrench, and every other tool you need will always be on the other side of the fuselage.