Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 6 of 6

Thread: Pros & Cons on Cont O-200 in a Kitfox SS

  1. #1

    Join Date
    May 2017
    Location
    Modesto CA
    Posts
    185

    Default Pros & Cons on Cont O-200 in a Kitfox SS

    I'm new to the forum. Thinking of building a Kitfox and would like to hear any pros and cons on installing a Continental in a Kitfox series 7. I know the Rotax Engines are good, but I'm sorta old school and like (and I'm use to) the slower turning Continentals. Thanks
    Brian

  2. #2
    Senior Member ken nougaret's Avatar
    Join Date
    Jan 2011
    Location
    North Florida
    Posts
    778

    Default Re: Pros & Cons on Cont O-200 in a Kitfox SS

    Hi Brian
    I just finished my SS7 last november with an o-200. I have 50hrs on it and am quite pleased. I'm old school also, and besides that i had the engine before deciding on a kit. And i knew that i could rebuild it, which i did. I went with a whirlwind prop for looks, weight and performance. I think one of the things i like best is taxiing along with the put, put, put idle sound. Nobody expects to hear that and have been asked several times what engine is in there?
    The down side is the added weight. But my balance came in perfectly and i can fly my wife and i, full fuel and 150lbs of baggage and be under 1550lbs.
    Ken
    SS7 O-200 Whirlwind

  3. #3
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,967

    Default Re: Pros & Cons on Cont O-200 in a Kitfox SS

    In addition to the weight advantage, the Rotax pros are: no mixture control, no carb heat, electronic ignition (not sure if the 0-200 has this), 4 gal/hour cruise on 91 AKI mogas, inexpensive motorcycle spark plugs, nearly no oil consumption between oil changes, 2000+ hours TBO, very even temp distribution to all cylinders due to water cooled heads, no air baffles required, great cabin heat with auto style water heater core, much less danger of CO in the cabin from a cracked exhaust heat muff, much smoother/less vibration running, much less noise inside and out, confidence due to huge number flying worldwide, modern close tolerance efficient design. Did I miss anything?

    Its a very easy engine to quickly take you from "old school" to "new school".
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  4. #4
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Pros & Cons on Cont O-200 in a Kitfox SS

    If i was looking at an O-200 for almost the same weight and 25% more HP I would look at an O-240

    Jim, you missed many add as you go aftermarket items like big bores, fuel injection, and turbos. Also the gear box means that if you have a prop strike engine damage most likely won't occur.
    ------------------
    Josh Esser
    Flying SS7
    Rotax 914iS
    AirMaster Prop

    Edmonton, AB, CWL3

  5. #5
    Senior Member jiott's Avatar
    Join Date
    Jun 2010
    Location
    Portland, OR
    Posts
    2,967

    Default Re: Pros & Cons on Cont O-200 in a Kitfox SS

    Good points Josh, I'm sure there are still more we have neglected to mention. Nostalgia is very important to some folks and I would never fault them for it, after all most of us fly these airplanes for fun and feel good, not for technical hard facts and economic reasons.
    Jim Ott
    Portland, OR
    Kitfox SS7 flying
    Rotax 912ULS

  6. #6
    Senior Member PapuaPilot's Avatar
    Join Date
    Nov 2013
    Location
    Nampa, Idaho
    Posts
    1,227

    Default Re: Pros & Cons on Cont O-200 in a Kitfox SS

    I have the IO-240 and love it. I have a 665# useful load and can do 140# of cargo. People always ask what the engine is when they hear it (it ain't no Rotax). With the injected engine I don't have to worry about carb heat.

    Advantages of the O-200:
    Easy to work on
    Very dependable
    Easy to time the mags
    Easy to adjust the carb (you don't have to balance two carbs like the Rotax)
    Electronic ignition available (I have the P-Mag and love it)
    Parts are reasonably priced and readily available
    Any A&P will be able to work on it (most don't have clue with the Rotax)

    I'm not down on the Rotax at all. The Rotax 912 would have been my other choice.

    You won't have quite as good flight & STOL performance due to the extra weight, but the Kitfox is a great performer regardless.
    Phil Nelson
    A&P-IA, Maintenance Instructor
    KF 5 Outback, Cont. IO-240
    Flying since 2016

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •