If you have sheet metal pliers or any pliers without teeth that will mar the aluminum, I would say just try to squeeze to as close as flat as you can and be on your way.
If you have sheet metal pliers or any pliers without teeth that will mar the aluminum, I would say just try to squeeze to as close as flat as you can and be on your way.
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3
I would tap those little dings out with a ball peen hammer. That metal is pretty soft and thin. It would probably tease out without any problem.
------------------
Josh Esser
Flying SS7
Rotax 914iS
AirMaster Prop
Edmonton, AB, CWL3