firewall forward

[Flybyjim]

Hello folks,
I am about 2 months out from ordering the firewall forward for a SS7 and Rotax 100 carb engine. After talking to Debra, (she has always been very helpful) I thought I would reach out and ask if there are thoughts about placing the order, items that may not come with the package that I will need down the road.

[DesertFox4]

Jim, the firewall forward packages are pretty complete minus propellor choice and associated spacers and bolts.
Not sure if oil cooler is included.

[efwd]

I just took delivery of my firewall forward about a month and a half ago. Oil Cooler is there in the 912iS kit.
Eddie

[jiott]

Highly recommend you get the optioal oil thermostat kit. Also get the remote oil pressure kit. Its also a good time to decide on your engine monitoring system and get those sensors, because most of them mount forward the firewall. Also the cabin heater kit.

[jrevens]

The oil cooler came with mine too. The new Rotax engines have a different type oil pressure sensor - a smaller, lighter unit that is a true pressure transducer. I have been told of some isolated issues with them, but they are supposed to be better for being mounted directly on the engine - they come that way. I chose to take mine off and use one of the older style VDO variable resistance sensors that matched my gauge, and mounted it remotely on the firewall as suggested by Jim. Those old sensors are pretty bulletproof when they aren't mounted on that vibrating engine. I ran -3 size teflon-lined SS braided hose to it. If you're going with a glass panel, I'm sure you'll be able to accomodate either type, but if you have a separate gauge, make sure it matches the sensor. I also used an oil temp thermostatic valve.

[Flybyjim]

Thank's guys, all good info.

Jim