Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 17

Thread: About to rebuild my carbs

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-05-2017, 05:53 AM #1
    Dorsal
    Dorsal is offline
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default About to rebuild my carbs

    The engine is 17 years since new, 7 years in service, 500 flight hours so it seems like a good time to replace all the rubber bits in the carbs (did so on the rest of the engine a year or two ago). Filing, removing then re-peening the butterfly screws seems the only slightly tricky part. Would appreciate any tips from those who have done it.
    Last edited by Dorsal; 03-05-2017 at 06:02 AM.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules