-
ignition question
I'm getting rough running on on ing. circuit. I plan on swapping the connectors to see if the miss moves to the other circuit. If it does is there any good way to determine if the problem is prior to the ign. boxes or after. I've changed all the plug wires and caps to no effect.
Thanks
EG
-
Super Moderator
Re: ignition question
What about the plugs? Ar they new? Gapped properly (I gap mine close at .018-.020")?
There are instructions for resistance checks in the Heavy Maintenance Manual for checking the stator coils and the ignition coils.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
-
Re: ignition question
How about the ground wires from the modules. If they are starting to break up this may result in rough performance. From my experience though,they usually just break completely and that module is dead.
Have fun, just keep looking
Cheers
Don
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules