Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Kitfox Aerocet Rigging

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 09-18-2016, 07:45 PM #1
    mdock
    mdock is offline
    Join Date
    Sep 2010
    Location
    Stillwater, OK
    Posts
    16

    Default Kitfox Aerocet Rigging

    I have a Kitfox III on aerocet amphib floats and was curious about modifying the rigging to move the floats forward. My CG is at the front limit and it is noticeable because floats tend to plow with the water line more than 1/2 way up the nose bumper. I vaguely remember someone talking about moving the floats forward. Is there a known procedure for doing this? Cut the rear supports shorter? Any info is greatly appreciated.
    Matt
    Last edited by mdock; 09-18-2016 at 07:51 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules