I also used a dremel with a sanding drum om the ribs. I bought a dremel viba tool for the door plexi. It worked great. I took the door hinge material to a machine shop and had them cut out professionally. I think it cost $50 but it was cheaper than a band saw. I blocked up the tail and installed all the tail ribs on the plane. It was a breeze.

I rigged my wings with the fuselage on the ground and then mounted it on the landing gear, no wheels, to do the rest. I also finished the wings while mounted to the plane. No rotisserie. I'm at the covering stage so I think I will have to use a rotisserie for the wings now.

After a few winter months off, I am jumping back in to finish my plane this summer.