406 ELT self test question

[t j]

I just installed an ACK E-04 ELT. A nice feature is it performs a self test each time the main switch is moved from Off to Armed.

The self test transmits on 121.5MHz for one second (3 audio sweeps) then transmits a 406 burst for 550ms (about 1/2 a second), the audio alert indicator beeps once, the remote light on the panel flashes once or twice, then returns to the Armed mode.

The self test can also be activated by pressing the Reset/Test button on the remote.

The installation manual instructs to perform the self test after installation and once every three months but there is no mention to do it during the first five minutes of the hour only.

It instructs to perform a G switch test after installation and once a year. This activates the ELT to operate as it would in a crash. It transmits on 121.5 for approximately 50 seconds before a 406 burst is sent to the satellites.

The manual says the G switch test should only be performed between the hour and 5 minutes after the hour and it is imperative that you do not allow allow an activated ELT to transmit for more than 30 seconds during G switch testing which means no 406 burst is sent.

I turn the ELT off when I load the plane on the trailer and Arm it...which will automatically conduct the short self test...during my preflight.

Finally here's my question. Anyone have any thoughts about the short self test when arming the ELT happening outside the first five minutes of the hour as per FCC requirements for testing ELTs?

For what its worth, before I installed the ELT I registered it so they know how to contact me. I performed the self test a few times outside the first five minutes and didn't get a call from ATC or search and rescue, so am assuming its okay to do so.