Trigger coil gaps?
How are these adjusted? There appears to be no movement available,do the brackets need to be bent
I have been having some problems, 6 partial failures resulting in 2 forced landings. We can't reproduce these failures on the ground.
Testing found one broken wire.Out of desperation I have replaced the stator,pickups and modules with low time items that are known to be good.
The modules are now mounted on the cabin side of the firewall,the red stator wires and pickup wires are long enough to reach comfortably(and almost in the centreline of the dynafocal mount,so movement shouldn't be such a problem)
The wiring to the coils will be extended,hopefully an uneventful test flight will happen in the next few days.
As a side note my IVO had one blade 11grams lighter than the other two.
This definitely wouldn't help the wiring and may have been upsetting the carbs
But the problem was showing up on climb out on the 2nd or 3rd circuit.
Am I missing something?