Hi all,

I know there has been a few posts on this over the years and I think I have read most of them. However, I have noticed that the right wing tank empties at a faster rate than the left tank. It shows sometimes over a 1/4 of a tank difference. I have had perfectly smooth conditions and kept everything level and balanced. So far I have done the following:

checked and straightened the vents on the filler caps
made sure the vent holes are clear
kept the ball centred and wings level
disconnected the hose from the left wing tank to the header tank to check for full and free flow


Is this normal? Any tips to check anything else would be appreciated.

cheers

ross