I am mounting the wings onto the fuselage and have a question. The distance between rib 1 and 3 is to be 35 1/2 inches. It looks like the instruction drawing show this center to center of the rib is this correct?
Setting the dihedral, the written instructions say : place a level on the front spar however the drawing is showing the rear spar from the level of 13/16" spacing. There are inconsistencies here and there just making sure I do this right.
Also, drilling a couple of the holes through the lift strut attachments while they are still attached to the lift struts and plane once the dihedral, washout and wing alignment is complete seems the thing to do before removing the wings. With a few clecos set in place these fittings will not move while removing the wings. Any advise is good here, this is an important step.
Great site, I am learning with every post I read, thanks for this help.
7SS