In my instruction manual, I have an appendix A - oil system installation with the cooler - and it has blank steps. Does anyone have an instruction sheet they can scan in?
thanks
Tom Livermore
SS7 912ULS
In my instruction manual, I have an appendix A - oil system installation with the cooler - and it has blank steps. Does anyone have an instruction sheet they can scan in?
thanks
Tom Livermore
SS7 912ULS
I have the same request as Tomfox... are there actual oil cooler instructions? If so I did not get them. The Kitfox folks are in Sebring, or heading there right now, so I'm wondering if anyone on this forum has a copy of the instructions that they could scan and send to me, if they exist. This would be for the 7 SS.
Also, has anyone incorporated one of the oil thermostats with their installation on a Series 7, and if so could you post pictures of how & where you positioned it?
Thank you!
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
tTom/Jhn,
email me ross@imaginecgi.com
cheers
r
Ross
Mt Beauty, Vic
OZ
Sold to Richard and Scott Taubman in OZ, 2019. Kitfox SS7,Rotax 912is Sport, Airmaster CSP 75" blades.
Landcruiser and Cub off road camper (doesn't get any kudos on this forum!)
I have a copy at the airport. Gonna stop by and pick up the snowblower tomorrow. I'll grab them and see if they have blank pages.
Jeff
I installed the oil thermostat in my SS7 (highly recommend it) and have pics of the installation that John McB sent me. I'm not at home now but will post the pics this evening.
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Thanks you guys!
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
attached is oil cooler instructions that came with my KF V project. I had to remove the front page to make the file size small enough to upload
Here are the pics I got from John McB on the factory oil thermostat installation:
Jim Ott
Portland, OR
Kitfox SS7 flying
Rotax 912ULS
Ross, Jeff and Jim - thank you all very much!
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime
Rotax in Europe sells a thermostat which is mounted directly on the oil cooler. Thermostat opens at 189°F / 87° C.
This installation uses less hoses.