Originally Posted by jdmcbean The bearing was eliminated on the Series 6 during testing... due to the .065 wall spars.. So if your 5 has .065 wall spars it should not be an issue. What were the spars if not .065" wall? I thought that is what Kitfox had always used?
Av8r3400 Kitfox Model IV The Mangy Fox 912UL 105hp Zipper YouTube Videos
.063 I think
Chase Model 5 OutBack 912 UL
My early Vixen had .058 spars. Phil
was it a 1400 airframe?
Yes Chase, 1400. Very early kit, 007 Phil
Forum Rules