I would say you got nearly all you need. Just start in on the build and see how it goes. If you really need something else it will become obvious. I did my whole build with only 2 sawhorses and one set of wing rotisseries and one small work bench with a vise. Borrowed a friend's band saw the couple of times I needed it. You will need lots of spring clamps and soft jaw bar clamps, but wait till you need them to get the right sizes. A couple of good C-clamps come in handy for pressing in bearings. The Dremel will be used a LOT. You will need a variety of hand files, even a small jewlers file.