0200 cg question for ss7

[scanman55]

Could anyone please tell me the distance from the firewall to the back of the spinner plate on a 0200? Standard length, without prop extension.
Thanks a bunch. scanman55

[jtpitkin06]

The raw distance is 32 inches +/- 0.50 depending on the spinner used. Most spinners have a flange on the rear that extend aft by as much as 1 inch. The rear of the plate does not allow for clearance between the spinner and the cowling. Metal spinners usually have a smaller flange than one of fiberglass.

John

[scanman55]

Thanks John, very helpfull. Got your e-mail. very much apprieciated. Mike