Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Carbon fiber spinner

  1. #11
    Senior Member
    Join Date
    Jul 2011
    Location
    milwaukee wi
    Posts
    490

    Default Re: Carbon fiber spinner

    John told me about UHS. They made my spinner 8.5 or 9 inches as I recall. It fit my smooth cowl very well.
    Attached Images Attached Images

  2. #12
    WISDAN's Avatar
    Join Date
    Jun 2009
    Location
    New London WI
    Posts
    145

    Default Re: Carbon fiber spinner

    Thanks Mr Bill I was looking at this spinner as well and might be my best option.

    Cheers!
    Dan G.
    Model IV 1200 - Tri-gear
    Jabiru 2200
    Flying

  3. #13
    Senior Member jdmcbean's Avatar
    Join Date
    Jun 2008
    Location
    Homedale, ID
    Posts
    536

    Default Re: Carbon fiber spinner

    Not knowing the Skyfox cowling.. not sure what size would fit best..

    Whirlwind has 9, 9.75, 11.3, 12 and 13 inch diameter spinners...

    The original Model IV smooth cowlings were sized for 8.5" if memory serves me correctly.. UHS spinners is another option.
    John McBean
    www.kitfoxaircraft.com
    208.337.5111

    "The Sky is not the Limit... It's a Playground"

  4. #14
    WISDAN's Avatar
    Join Date
    Jun 2009
    Location
    New London WI
    Posts
    145

    Default Re: Carbon fiber spinner

    Thanks for the info John. Your 8.5" recollection sounds just about right to fit my Skyfox cowl. By the way, the nose gear part you sent me in June fit perfect on my Model 4-1200.

    Thanks
    Dan G.
    Model IV 1200 - Tri-gear
    Jabiru 2200
    Flying

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •