-
HELP with Model 4 or new Vertical dimensions
Looking for some Info. If anyone out there could please measure the width of the vertical stab from the Leading edge to the trailing edge at the base of the vertical and at the tip of the vertical. This info would be really helpful to me for some research I am doing
-
Re: HELP with Model 4 or new Vertical dimensions
At the base it measures 29". At the top you are dealing with a radius that almost comes to a tangent at the point where the rudder attaches to the vertical. I dropped down 2" from the top and measured 9" chord at that point. I hope this is helpful, if you need anything else it's just a short hop across the driveway to my shop.
Just in case you wanted the chord of the vertical fin and rudder those dimensions are 48" at the base (just above the Horizontal Stabilizer) and again at 2" down from the top I got 21".
-
Re: HELP with Model 4 or new Vertical dimensions
Thank you so much. If you wouldn't mind what is the total height as well from fuselage to top at the trailing edge.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules