Model 1 Bubble Door Mod

[SkySteve]

This year I have added two new items to my plane. A fuel flow instument and custom tinted bubble doors. There have never been bubble doors for the model 1. Now there are.

These doors have added 6 inches of interior room to my cabin and have eliminated the need for the mid-door bar that hits you right in the shoulder. The look is much cleaner without the middle door bar and so is the view. The window is very clean with no stretch marks and no fish eye. These doors have made my plane a true two person aircraft. My model 1 cabin is now 42 inches wide! There is plenty of room to let your knee relax out to the side. Also plenty of room for your shoulder and elbow.

This is a GREAT MOD. They are made from 1/8" acrylic. If you want them, we now represent the manufacturer and you can get a set for $400, plain or tinted, same price.

Here is the link to the photo album: http://www.teamkitfox.com/Forums/album.php?albumid=78

[lbushrod]

Steve,

Really like the doors. Where did you get them? Would like to see if they make a set for the model 2.

Pete

[jrthomas]

Steve, Are these doors available for model 4s? If you don't use the factory door frames,how are they attached? Do they still hinge from the top and use the the other Kitfox hardware?How can we order? More info, please.Thanks.

[SkySteve]

Pete,
I'll check on the model 2. I think it can be done for the same price, but I'll confirm.

[lbushrod]

Steve,

Hope they do, the doors look outstanding. I have the same questions concerning the mounting but not a lot of concern.

I noticed that you are representing the manufacturer which is great! I know a number of Kitfox and Avid people who would be interested. Get me some info please.

Pete

[SkySteve]

Tom,
You can get model IV doors from Kitfox Aircraft. My intent is not to take business away from Kitfox, but rather fill a need that I had. I know others have the same need for things not offered by Kitfox. If you really want THESE doors, I think we can make them for you, but like I said, Kitfox already has bubble doors for your model.

We do use the factory door frames, the top hinges and all normal hardware. Just use a dremel tool to cut out for the hinges and trim along the outside for a final fit for your plane. My model 1 has a door clasp on the bottom of the door frame so the center bar was there for added strength. These doors are strong enough that I could remove the center bar. I think the model IV has the door clasp as part of the center bar, so you would not want to remove that.

[lbushrod]

Steve,

I called Deb not quite a year ago about bubble doors for my model 2 and they did not have them. I knew they were going to provide the newer models. Glad there is no competition.

That being said, I fly with a couple of other kitfoxes and two avids. All of us can handle tools so the question is can we make them fit. Am going to forward this post to a couple of them.

Thanks,

Pete

[Colinpmoss]

Hi
Are the bubble doors still available for a mk1. If they are, could you give me the contact details of the manufacturer. Also I need to find out if they would ship to the UK.
Thanks
colin

[GDN]

I have a kitfox 2, can you give me an adress or website to contact that company making the bubble door PLZ ?

Fly Safe

[jtprouty]

I know this is an old thread but I'm in need for a Kitfox 1 door and would like to know if these are still available. Do the include the door frame (complete door?)

Jimmy