-
Senior Member
Re: Rigging
I use to have to push on the rudder to keep the ball centered. I went a baught a wedge from somebody, can't remember right now, and put it on my rudder, mine is on the right side, mine needed left rudder to center the ball. I taped mine on with the thought, if it fixed it I would make it permanent. well that was like 5 years ago. I taped it on with packaging tape and than painted to match my white paint.
now keep this in mind, you want the rudder trim fixed first, and than go for the wing. I also had a slight heavy wing. I went to the rear of the other wing and adjusted at the strut to bring the wing up. I did one turn at a time. also make sure you have plenty of threads remaining for just a thing. mine flies hands off now. and feet off.
one more thing, if you adjust 1 turn and it goes the other way, than back off 1/2 turn.
Last edited by Slyfox; 11-24-2013 at 09:38 AM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules