Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 9 of 9

Thread: Support a new airport!

  1. #1
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Support a new airport!

    Hi everyone, no obligation but just by my house they are putting in a new airport. This airport is 100% owned by pilots and aviation businesses who want security in owning their own facility. Lots of people are for this airport but naturally a few are against it. A facebook page was just started and it would be great if those of you who are on facebook could show your support for GA airports by liking the page. The link is: https://www.facebook.com/pages/Parkl...16141538470933

    The benefit of this page is you will get an almost daily construction update on the progress which is fun to watch.

    Here is a little info on the airport

    Parkland Airport is initially designed to provide an East/West asphalt runway. Phase 1 will be 2600'X100' and if the weather cooperates this fall, it will go straight to Phase 2 which is a 4900'X100' runway. This will also include taxiways, aprons, terminal building, and areas for general aviation services.

    The following services are planned:
    -GPS Approaches (WAAS)
    -FBO
    -100LL and Jet A
    -Secured Aircraft and Vehicle Parking
    -Designated Run-up Areas
    -Aircraft Washbay
    -Hanger Lot Grading and Drainage
    -Single or 3 Phase Electric
    -Natural Gas, Potable Water, and Sewer
    -Telephone and Cell Service
    -Wi-Fi and Wired Internet
    -Security Fencing, Cards, and Tracking
    -Winter and Summer Maintenance
    -Airport Terminal Building and Lounge
    -Washrooms and Shower
    -Local Transportation Services
    -Airport Viewing and Public Events Area

  2. #2
    Senior Member
    Join Date
    May 2009
    Location
    Lethbridge, Alberta
    Posts
    270

    Default Re: Support a new airport!

    consider it done

  3. #3
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Support a new airport!

    Thanks Wannafly!

  4. #4
    Senior Member
    Join Date
    Oct 2009
    Location
    Liberty Lake, WA
    Posts
    205

    Default Re: Support a new airport!

    I am with you also. Good luck.
    Stan Inzer
    912 ULS
    Dynon Skyview 10"
    N599KF

  5. #5
    Senior Member Pilot4Life's Avatar
    Join Date
    Apr 2009
    Location
    Sierra Vista, AZ
    Posts
    247

    Default Re: Support a new airport!

    Promoting GA is hardly a burden....just "Liked"....maybe one day we Southern folks (USA) will stop by.
    Chris Holaday
    Looking at the Model 5 or newer for size!

  6. #6
    Senior Member Esser's Avatar
    Join Date
    Jul 2011
    Location
    Edmonton, AB
    Posts
    2,048

    Default Re: Support a new airport!

    Right on thanks guys. Maybe one day we will have to have an iron butt fly in. Might be a little far for most kitfoxers though

  7. #7
    ackselle's Avatar
    Join Date
    Oct 2010
    Location
    Winnipeg, MB
    Posts
    175

    Default Re: Support a new airport!

    Ta Da!... Done!
    Ackselle
    Kitfox IV 1200 Classic C-GIKV
    29" Airstreaks, 11" Matco Tailwheel
    ROTAX 912, Hoffman HO-V352F CS Prop

  8. #8
    Senior Member Dorsal's Avatar
    Join Date
    Sep 2008
    Location
    Central, MA
    Posts
    1,511

    Default Re: Support a new airport!

    A little late to the party but done.
    Dorsal ~~^~~
    Series 7 - Tri-Gear
    912 ULS Warp Drive

  9. #9
    Senior Member SkyPirate's Avatar
    Join Date
    Apr 2009
    Location
    Edgar Springs MO
    Posts
    1,841

    Default Re: Support a new airport!

    done..they are building us new hangars here at USA M48 propose to be finished next month so I know your excitement

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •