-
Senior Member
Mass balance weights
The instructions for mounting the mass balance weights on the ss7 don't give a measurement of where to drill the 4 center holes. The diagram shows them centered above the spar but if i follow the edge distance and distance between holes it puts them 1.5in behind the spar. ken
-
Re: Mass balance weights
Hello Ken,
On page 65 of my instructions there is a specific warning not to drill into the spar. Your instructions may differ but, 1.5 inches behind the spar is about where I drilled the holes.
I've yet to permanently mount the weights but, the holes are drilled and ready.
-
Senior Member
Re: Mass balance weights
Thanks for the quick reply and pic tom. My instructions are the same i just don't understand why the diagram shows the holes directly over the spar. I've been following your build and your coming along nicely. ken
-
Re: Mass balance weights
Hello Ken,
Good to see you progressing. Maybe, one day, we'll have a "Florida Fox Squadron."
Tom
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules