Wheel pants mods

[gizmos]

Here is how I modified my pants

[gizmos]

Front pants, I put tape only on rear half of pants so epoxy will not stick. Then I put clear shipping tape over the blue tape and waxed only the tape area with Johnson's paste wax.
This photos after I cut it apart. But you can see where I made the line

[gizmos]

I put 3 layers of 4 oz glass cloth. I put a little carbon black in the epoxy so I can see how deep my cut is when I separated the halfs. I used a dremel with a diamond blade to cut.

[gizmos]

Here you can see it installed before I glass in the fork . I over cut the hole to allow for clearance during turns

[gizmos]

I used nut plates with solid rivets to hold them in place

[gizmos]

I made reinforcement plates with hinges to allow checking tire pressure .

[gizmos]

Here is the outside of the access doors