Dynon SkyView in a KitFox

[N213RV]

I am looking at installing a Dynon SkyView into a KitFox SS7. I was wondering if anyone else has done this yet and where they mounted the ADHARS and the autopilot servos. Pictures would be a bonus!!

[Dorsal]

Here is my install of AP servos.
http://www.teamkitfox.com/Forums/album.php?albumid=207

[RadialFox7]

Hi Mike, I'm not putting in the auto-pilot but did make a shelf for the ADAHRS just aft of the extended baggage shelf adjacent to the static port. See attached JPEG - its set for center line and level horizontally. I did degauss the steel tubing as the powder coating really sets up a strong magnetic field. The OAT is mounted on the forward wood bulkhead of the tail access opening.

[Esser]

If my $.02 count I am going with MGL. Not only are they a sponsor of this site but they are super customizable for anything you need. Even up to touch screen check lists that you make yourself. Give them a look. A lot of Reno guys use them.