-
Senior Member
Deburr the inside of the spar
What is the best way of deburring the holes inside the spar after drilling the spar attach plates at the root?
-
Senior Member
Re: Deburr the inside of the spar
Try using a deburring tool
http://tinyurl.com/paduaj5
you can get the basic tool with several outside deburring bits included at Home Depot but they don't include the inside deburring bit.
MSC has the inside bits albeit double the price.
John
-
Senior Member
Re: Deburr the inside of the spar
Thanks John,
I do have the deburring tool. I just didnt know there was a bit for the internal.
-
Super Moderator
Re: Deburr the inside of the spar
In my former life as a machinist, we did use these for deburring the backside of blind holes.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
-
Re: Deburr the inside of the spar
with the deburing tool you can switch the blade on the other side like that and extension the arm...
100_0463.jpg
-
Senior Member
Re: Deburr the inside of the spar
Thanks JF. I never knew it went in sideways. I feel dumb haha. I just tried it in the garage. I think I need a smaller tip as it doesnt seem to be doing agood job of removing the burr
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules