Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: spray amounts

  1. 06-14-2013, 07:29 PM #1
    phintz
    phintz is offline
    Join Date
    Nov 2012
    Location
    Battle Creek, Ne
    Posts
    165

    Default spray amounts

    OK gentlemen, its getting close to pucker time!!. I'm ready to begin spraying poly brush and poly spray. This is for a Series 6! My question is , how many gallons of polybrush does it take, same question for poly spray? I have 1.5 gallons of un reduced polybrush left and my shipment of 3 gallons polyspray just arrived. Is this enough?

    Getting closer
    Patrick
    series 6 builder
    Reply With Quote Reply With Quote
  2. 06-17-2013, 06:29 PM #2
    War Eagle
    War Eagle is offline
    Senior Member War Eagle's Avatar
    Join Date
    Jul 2010
    Location
    Nampa Id
    Posts
    257

    Default Re: spray amounts

    It has been a few years since I built my series 7 but I think I had two gallons of each and had a little left over.

    The first coat of polybrush was brushed and the second coat we sprayed it.

    The polyspray took 3 coats because we sanded between the first two in order to make a really smooth base before we started primer and finish coat.
    Reply With Quote Reply With Quote
  3. 06-17-2013, 09:54 PM #3
    phintz
    phintz is offline
    Join Date
    Nov 2012
    Location
    Battle Creek, Ne
    Posts
    165

    Default Re: spray amounts

    thanks war eagle, wanted to be sure so I had enough on hand!!!

    thanks again.

    Patrick
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules