Firewall Material

[Tom T]

Well, as I await arrival of my new Kitfox project, (7 orphaned kit) I've been working through a list of items to check before continuing the build.

Can anyone confirm the material used in the firewall to be stainless steel? Without the build manual this information is a little hard to find.

Arrival via Partain should be about Halloween, then I'll get some pictures up and get going on details.

Thanks for the grreat forum.
Tom

[MotReklaw]

My SS kit has a stainless firewall. Tough as the dickens to trim....

[jtpitkin06]

You've mentioned lack of a manual a few times. Why not purchase a build manual, eh? There's lots of valuable info in those pages.

John Pitkin

[jimcarriere]

My SS kit has a stainless firewall. Tough as the dickens to trim....

A related, and equally wonderful, characteristic of stainless is just when you thought you had finished dressing all of the sharp edges... a few days later your fingers somehow find yet another tiny little sharp *****ly piece of metal sticking out, right when you least expect it!

[Esser]

Is there a lot of trimming for the firewall?

[ken nougaret]

the firewall comes with an outline of where to cut; about an inch off the perimeter. it's like the instrument panel came outlined. i used a zip wheel. like tommy said, tuff to cut.
ken

[Tom T]

Thanks guys, I really appreciate the help. To Johns point, I do have a build manual but it's in the truck with the airplane ;-). I'll have it next week with the project arrives, but I've been filling my days with planning project details.

Thanks again!
Tom

[jiott]

The SS firewall that came with my SS7 kit required no trimming; only cutting a couple holes for pass-throughs.

Jim

[High Country]

What is the ideal thickness for the SS. I have the old galvanized one and want to replace it with SS

[MotReklaw]

The SS firewall that came with my SS7 kit required no trimming; only cutting a couple holes for pass-throughs.

Jim

Lucky guy.