-
Senior Member
Rib #2 KF SS
I'm epoxying rib 2 to my spars and shimming to get the right curve to match the bottom ribs. I'm wondering what others do to ensure a tight fit where the front of the rib touches the spar. I guess my only option is to thoroughly prep the rib and the spar before putting these two surfaces together. This seems like it would be critical area as you wouldn't want that coming loose.
Any tips?
Thanks,
Last edited by MotReklaw; 04-25-2012 at 09:27 AM.
Reason: add omitted word
Tommy Walker in Alabama
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules