-
Re: Low Fuel Sensor
On my header tank, the welded on collar is slightly larger than 1". My plan is to drill the 1/4" hole to 1/2" and tap it. That will leave plenty of "meat" on the collar. Seems like the easiest most reasonable thing to do, to retrofit it.
Edit: The low fuel sensor, the optical one that came with the kit, is actually 3/8" NPT not 1/2" as originally thought, so I'll being drilling and tapping to 3/8".
IMG_3272.jpg
Last edited by Jerrytex; 09-30-2020 at 07:23 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules