In France we use a lot of DUC propeller (French manufacturer).
Mine is becoming old and received gravel chocks so i have to plan to change it one day.
Just to know wich one you use on the kitfox with a Rotax 582.
Thanks you
In France we use a lot of DUC propeller (French manufacturer).
Mine is becoming old and received gravel chocks so i have to plan to change it one day.
Just to know wich one you use on the kitfox with a Rotax 582.
Thanks you
I've got a Model III with an Ivo Medium 2-Blade quick adjust 70". I have not flown it yet. It is easy to adjust and seems very well made. No complaints so far in my ground runs.
-- Paul S
GDN
When I had my Mk 4 with a 582 it had an Ivoprop 3 blade Ultralight prop on it. It was a great performer and the pitch adjustment mechanism is clever as all blades are pitched together with a large central nut that turns to adjust the pitch really easily. This means you don't have to individually try and get them to be all the same as it does it for you.
I loved it and could adjust it for the type of flying I was doing. Ie if I was off on a long cruise I would pitch it up by one turn an get another 8-10 mph. If I was going in and out of short strips I would turn it back and have the best climb performance. They are not expensive either. Another good thing I found is that the blades are quite flexible which means that any small tracking disparities that might exist between blades disappear when the engine is up to speed due to centrifugal force which makes it a wonderfully smooth prop' to fly behind.
I dont know what your approval process is like in France so please check before buying anything.
Try and avoid a GSC Tech prop....
Kitfox 4 (1050)
912UL
Based in UK
Thanks for all your answers. I think i will like the easy adjust of the Ivoprop
Wich diameter the IVO 3 blades ?
Last edited by GDN; 03-23-2012 at 02:00 AM.
I'm afraid I don't know, but it might be worth sending a message to Fred Colman on this forum as he has my old prop on his Kitfox. I'm sure he'd be happy to do a quick 'spinner to tip' measurement.
Kitfox 4 (1050)
912UL
Based in UK
OK you will laugh but how found a member on this forum ?
click the -Community- tab at the top of the page and pull down to -Members List-.
Dorsal ~~^~~
Series 7 - Tri-Gear
912 ULS Warp Drive
Roger
Pm sent
Hi GDN
68" 3 blade IVO light on Kitfox Mk 2,582 c/w 3-1 reduction could not be faulted.The IVO light comes in two adjustment ranges,and I do believe that the coarse range would be the best choice for 3-1 or higher.Mine being the finer range,needs to be very nearly fully (coarse) adjusted to obtain 6,200 rpm static.I got great info from the members of this forum when I was looking to change from GSC,thanks guys .
Hello!
I've got a GSC 68" 3 blade prob with 3:1 reduction at 6200 rpm static at mine Kitfox III with 582 greyhead.
It works with 18 Degree at 75%, 1000-1200 ft/min, 125 km/h at 5800 rpm and 13L/hrs. Also the woodprop looks great....
Olaf