Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 10 of 18

Thread: Coolant temperatures for a Model 5

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Join Date
    Nov 2009
    Location
    Oregon
    Posts
    154

    Default Re: Coolant temperatures for a Model 5

    Good point about the oil tank Dave - a blanket around that would be smart if you have room.

    Does anyone block airflow to their heads to control their head temps, or does everyone focus on the radiator and oil cooler for this control?

    My head temps are low too, so i'm just wondering if covering the rad allows for enough control.....

  2. #2
    Senior Member Monocock's Avatar
    Join Date
    Jan 2009
    Location
    UK
    Posts
    226

    Default Re: Coolant temperatures for a Model 5

    After reading this thread last night I went down to the hardware shop and bought some gaffer tape planning to tape off part of my oil cooler. I decided to fly for 30 mins first to see what temps I was getting (any excuse to fly....).

    After about 10 mins at 4800 rpm my oil was 190 and the coolant was 160. Bearing in mind the OAT is 24f this morning I have decided to leave the gaffer tape in the toolbox.

    She certainly wanted to climb this morning! 1700 fpm up to 4000 feet
    Kitfox 4 (1050)
    912UL
    Based in UK

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •