Hi all,

Now that I'm covering my right wing (the only one containing a tank) I removed the cap, only to find out htat is is a rusty mess underneath.
I cleaned the tank (according to S60) and rinsed with water (because my tank was one of the types that are not supposed to be cleaned with acetone - but that is at the end of the service letter.... I know, I know...)
Althouhgh it had a good dry period with the cap off, the water vapor must have done its job, as well on the cap as on the filler-neck.
Now what can I do? Clean it up and put some kind of varnish onto it? The rusty particles now are falling into the tank....

Any advise will be very welcome....
You may even laugh about this one (a bit)...

hans