1 X 19 SS cable.

When routing Stainless steel cable though eyelets and guides the ends have a tendency to fray. Stop the fraying with a few drops of super glue on the end to keep the individual wires in place. Wipe the end after you apply the glue to smooth the wires.

To cover the ends of wires to guard against "meat hooks" use heat shrink tubing. But what do you do if you already have a ferrule crimped in place? A simple solution is to coat the exposed wire end with hot melt glue. It forms a nice smooth coating that can be molded when it cools a bit. Or simply heat the glue witha heat gun to smooth out any strings or blobs.