Baggage Area

[Danny]

Anyone have some decent photos of a completed baggage area before the fuselage is covered, in your Series 7/SuperSport. Have yet to see any close up photos to see how others have completed this area.

Thanks
Danny
SuperSport in Progress

[RandyL]

Danny, here's some that were passed along to me, this is not my project...


email cargo bay.jpg

email cargo bay 1.jpg

email cargo bay 2.jpg

[RandyL]

I didn't receive any instructions with my Cargo Bay Kit, not sure if there are any. Question: is everyone putting their balsa/glass floors inside the bag and then putting floor rentention screws through? Is anyone screwing the board down first and letting the bag sit on top of it?

Seems like it might be a bit of trouble to get everything in & out first unless you could screw the floor down first. I'm assuming this whole thing comes out every year for the Condition Inspection.

[Danny]

Randy,
Thanks for the photos...is this the cloth compartment that Kitfox sells? I didn't purchase a cargo bay kit with my kit.

Not sure how I will proceed with mine. Would like something a little more solid, but don't want to add a lot of weight. I think this is an area left to our imagination. I also want the rear fuselage to be easliy accessible so however I proceed, I don't want to block off that area with something that I can't open up easily.

If you come up with any ideas, I sure would like to hear them.
Thanks
Danny Powell
Super Sport

[RandyL]

Yes, this is the 'Cargo Bay Kit' that they get $495 for. It's pretty light, I have no problem with that, and it looks like it would come out fairly easily, just lots of velcro to deal with.

[RandyL]

Oh, forgot to ask: anyone had a problem with the edges of the balsa/glass board delaminating? They look like they need to be sealed somehow. If I end up putting the board inside the bag I'll probably glue some Cordura to it and wrap it around the edges. Anyone done this?

[DanB]

Not sure how I will proceed with mine. Would like something a little more solid, but don't want to add a lot of weight. I think this is an area left to our imagination. I also want the rear fuselage to be easliy accessible so however I proceed, I don't want to block off that area with something that I can't open up easily.

Danny,
As I am working on a model IV I know our planes have a lot of differences, however, if you are looking for alternatives to buying the baggage kit...this might give you some ideas. www.azshowersolutions.com/Baggage1.html
Many of us in the Phoenix area have built the sides of the baggage area with Poly Fiber material and then covered it with a presentable material. FWIW

[RandyL]

Dan, that mod looks great, very creative, but aren't you worried about getting access to the aft fuselage area?