what are you guys doing for brake lines. not sure about using the nylaflow and the brass fittings weigh a ton. thought i would use aluminum fittings and size 3 braided teflon lines. the extra weight of the lines would be largely offset by the lighter fittings.
also about the fiberglass seat. it has got to rub the 4130 it rides on raw from weght shift and vibration, and then the exposed 4130 rusting. i thought i might try putting some herculiner on the tubing the seat rests on as well as the inner lower door frame. i have never used this stuff. it also comes in grey which would be close to the powder coat. what are you using to pevent this or are you just not worrying about it. keith