Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Is this normal?

  1. #1
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    870

    Default Is this normal?

    We were removing the fuel pumps to be sent off for replacement and noticed the bottom rubber engine mounts sagging while at rest.
    Does your rotax bottom mounts look like this?

    Sorry left is up in the pic.
    Attached Images Attached Images
    Harlan and Susan Payne
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop.
    https://www.youtube.com/@KitfoxPilot/videos

  2. #2
    Senior Member JoeRuscito's Avatar
    Join Date
    Jun 2018
    Location
    Charleston, SC
    Posts
    361

    Default Re: Is this normal?

    Mine looked like that after about 800 hrs. I just replaced them at 950 hrs. I was noticing that the spinner gap was getting smaller so I decided to replace them. I did all 4 but by far the worst one was the copilot side lower one.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •