Quote Originally Posted by AvDES LLC View Post
What do you have the float armature set to? Try 13.5 mm and make sure to do a full throttle grind run up before taking off. Run up for well past a climb out duration to make sure the carbs are refilling quickly enough after the adjustments
right now at stock. I've had so much trouble with these floats the last few months, now they are getting real bad, grounded until the floats come in. This thing will sit there not running and start leaking out the right carb, turn on the facet pump and starts pouring out. If I let it set a day with the fuel off and pull the bowl it will be about out of fuel in the bowl. I think it's soaking up into the floats. The other day I took the floats out of the left carb and put them in the right, took a set of floats that I had from years ago and put them in the left. I turned the fuel on and the facet pump, made sure the fuel was up all the way in the bowls. let it set for a couple days and check that right carb, fuel still at the proper level. stinkin' floats bad for sure there. now to set and wait for the blue ones. yes I'll set it to the 13.5mm thanks.